model Auctions Prices | model Guide Prices (2024)

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Toya mini lathe with short bed and large face plate, model ML.2.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Collection of model engineering tools and tooling.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Large quantity of model engineer magazines, helicopter model, and classic bike.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner 5a vertical steam engine, having steel clad cylinder, drain co*cks, reverse gear, spoke flywheel, 2 1/4 inch stroke x 2 inch bore. The model finished in green paintwork and polished brightwork.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner model beam engine, having Watts parellel motion, 1 inch bore x 2 inch stroke with 7 inch diameter flywheel, mahogany lagged cylinder outside steam valve, displacement oiler. The model finnished in green paintwork with polished bright work and vertcial boiler. Boiler needs attention.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner 'Williamson' barn engine, model by Tubal Cain with governor, displacement oiler, model finished in black, blue and red, with polished brightwork, 5/8 inch bore x 1 1/8 inch stroke, flywheel 5 3/8 diameter, height 10 inches (254mm).

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner No.4 steam engine, connected to bicycle dynamo and having metal clad cylinder, displacement oiler and steam control, 1 1/2 inch stroke. The model finished in blue with polished brightwork, height 10 inches (254mm).

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Heinrici Hot Air engine, inverted vertical type by Edgar T. Westbury, 1 inch bore x 1 3/4 inch stroke, Reeves castings with twin flywheels on tapered stand, height 20 3/4 inches, The model finished in green and red paintwork with polished brightwork.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner double cylinder steam engine, having metal clad cylinders, steam valves. The model finished in green paintwork with polished brightwork.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner 10V steam engine, having metal clad cylinder, displacement lubricator 3/4 inch bore x 3/4 inch stroke. The model finished in green paintwork with polished brightwork, height 6 inches (152mm).

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner 10V steam engine, having metal clad cylinder, displacement lubricator, 3/4 inch bore x 3/4 inch stroke. The model finished in green paintwork with polished brightwork, height 6 inches (152mm).

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner 'Sirius' steam engine, having brass displacement oiler, disc flywheel, 1 inch bore x 1 inch stroke. The model finished in dark green paintwork with polished brightwork on mahogany plinth, length 6 inches (152mm).

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner beam engine, having Watt's parallel motion, 1 inch bore x 2 inch stroke with 7 inch diameter flywheel, mahogany lagged cylinder, outside steam valve, displacement oiler. The model finished in polished bright work with red and green paint work on polished oak plinth.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

A Stuart Turner D10 vertical steam engine, together with copper horizontal boiler and book 'Model Marine Steam' by John Cundell.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Scale model of weir/feed pump with steam driven action, finished in polished and brass with red paintwork.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Model vertical marine steam engine.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

19th century model of a beam engine, constructed in polished steel work with turned supporting columns, Watts parellel action, eccentric driven steam valve, extended tin cylinder with brass cup oiler, beam linked water pump, steam control lever, pierced brass supports and bushes. The engine is mounted on a pitch pine base with glazed panels and geometrical decoration, width 63cm, height 53cm.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Vertical model steam engine, having balanced crank, fixed cylinder, disc flywheel and mounted on circular base.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Stuart Turner 10V steam engine, having metal lagged cylinder, 3/4 inch bore x 3/4 stroke. The model finished in green and black paintwork with polished brightwork, height 6 inches (152 mm).

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Enlarged model of Trojan vertical steam engine, having mahogany lagged cylinder on column supports with bed plate and disc flywheel, 1 7/8 inch bore x 1 7/8 inch stroke, on mahogany plinth.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Edgar T. Westbury 'Unicorn' model steam engine, no plinth, 3/4 inch bore x 1 1/4 inch stroke, single cylinder, spoke flywheel. The model finished in black and red paintwork with polished brightwork, length 10 1/2 inches.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

3 1/2 inch gauge 'Rob Roy', built to Martin Evans drawings 0-6-0 locomotive, new copper boiler, no history, model is 65% completed with most items to finish model, drawings and constuction manual.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

3 1/2 inch gauge 'GWR' Firefly locomotive, to Martin Evans drawings 2-6-2 locomotive, new copper boiler with superheater, no history, model is 70% finished, set of drawings.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Quantity of model rail track, suitable for 5 inch gauge in twenty five foot lenghts, approx. 250 feet.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

2 1/2 inch gauge passenger brake coach exhibition model, having fitted interior with seating luggage racks and lighting, finished in LMS livery, No.7711, 77cm long.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Gauge 1 Aster model 'King Arthur Class' live steam 4-6-0 locomotive and tender, pressure tested but never steamed, Southern No.768 'Sir Balin' together with track side water feed.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Approximately 1 inch scale scratch built brass agricultural engine, with spoke flywheel, sight glass, pressure gauge, hand feed pump from tender, trunk guide to single cylinder, displacement oiler. The model finished in polish brass work with red strake wheels and black spoke flywheel with water bozer having hand feed pump and drain co*cks, total length 60cm.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Approximately 1 inch scale model of a traction engine, finished in polished brass and copper with sight glass, displacement oiler, steam pressure valve, solid flywheel and traditional chain steering, length 39cm.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Markie 1 inch scale model showmans engine, Prince of Wales having spirit fired boiler, boiler test certificate dated May 1981 working pressure 30-50 p.s.i. This model was manufactured by Farnham engineering company and is No. 40 of limited edition of 100. The model is fitted with trunk crosshead guide, eccentric steam valve, steam pressure gauge, regulator brake to rear wheels and has electric generator with lights fitted to canopy supported on brass olivers and having rubber road tyres fitted to wheels, the model is finely finished in black paintwork with Prince of Wales plumes to bellied water tanks.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

3 1/2 inch gauge Britannia 4-6-2 locomotive and tender, 90% complete, copper boiler with fittings including water gauge, pressure gauge, safety, blower, whistle, injector, clack, blow down valves, chassis details includuing twin outside cylinders, Walschaert's valve gear, drainco*cks, mechanical lubricators, eccentric driven feed pump and injector. The model finished in BR green livery, 136cm long.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Finely engineered and well presented 3 1/2 gauge model of the SR Schools Class 4-4-0 locomotive and tender No.939 'Leatherhead', with brazed superheated copper boiler with fittings including water and pressure gauges, safety, blower, whistle, injector, clack valves and blow down plug. Chassis details include three cylinders with independant sets of Walschaert's valve gear, fluted motion, cab controlled drainco*cks and pipework, mechanical lubricator, eccentric driven feed pump and bypass, injector, whistle, dummy brake gear, and other details. Tender details include hand feed pump, hand operated brake gear, water co*ck, steps, hand and lamp irons, finished in SR livery and lining, display track, 6 1/2 inches x 44 inches.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

2 inch scale Ransome, Simms and Jefferies Thrashing drum, model AM54 unfinished, constructed with tongue and grooved boarding on framework, it has concave and drum, main drum and bearing plates.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

2 inch scale Clayton undertype steam wagon, constructed from Reeves castings with 'Swindon' copper boiler having original boiler test certificate No.89411, hydrostatic test pressure 200lbs p.s.i., never steamed, dated 9th March, 1989. Vertical boiler with sight glass, pressure gauge, hand feed pump to cab, eccentric feed pump, clack, chain drive, whistle, blowdown valves. Engines details include twin cylinders with enclosed valve gear and crank, ratchet operated lubricator, chassis details include worm and quadrant Ackerman steering, rubber tyred wheels with brass hub caps, working leaf springs, rear axle differential unit, water tank, flat bed with rivetted chassis, power take-off, and rear water tank. The model was built by Mr. C.G.S. Clarke and is finished in polished brass work.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Finely engineered 3 1/2 gauge model of the C.R. 0-6-0 side tank locomotive No.498, built to the design of Rob Roy, with brazed superheated copper boiler, with fittings including water and pressure gauges, safety, blower, whistle and clack valves. Chassis details include twin outside cylinders with inside Stephensons's link reverse, crosshead driven feed pump and bypass, hand operated brake gear, mechanical lubricator, footplate controlled drainco*cks, hand feed pump, steps, hand and lamp irons, finished in black and polished brightwork, 7 x 21 1/2 inches, showtrack and perspex cover. Original boiler test certificate dates 12/07/1985, Morewood Model Engineers Ltd., No.850, 160 lbs/psi.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

5 inch gauge B.R. 1500 class 0-6-0 Pannier tank locomotive No.1504 'Speedy', built by B. Burford in 1960/2 and run five to six years before being laid up due to pressure of owner's business interest, was exhibited in the exhibition '150 years across the Shannon', first and only boiler certificate 1964, fitted with water gauge, pressure gauge, blowdown valve, whistle, steam brake, Walschaert's valve gear, injector and pumps both axle and hand, lever reverse, silver soldered boiler, (80lbs working pressure, hydraulic test 160lbs psi) stainless steel grate and firing tools, mechanical lubricator, connections for water tank trailer, model finished in BR black livery with show track.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

5 inch gauge model of a New York Central and Hudson RRR Baldwin, 4-4-0 locomotive and tender with super heated copper boiler and fittings including twin water gauge boiler and valve chest pressure gauges, safety, blower, injector, steam brakes, whistle, clack and blow down valves, chassis details including twin outside cylinders with inside Stephenson's link valve gear, double bar crosshead guides, wedged and bolted connecting coupling rod bearings, cab mounted mechanical lubricator, foot plate control to drain co*cks, cross head driven feed pump and bypass, steam operated brake gear, two injectors, whistle, dummy sand box and pipes, bell, head lamp, cow catcher, running lamps and many fine features, cast iron cylinders, hydrostatic lubricator. Tender details including hand feed pump, water co*cks and twin four wheel bogies. The locomotive was built from Clarke castings in 1995. Boiler history and test certificate BSMEE. expiring the 30th day of March 2004. Certificate No. 97/01589. This locomotive is built to a high engineering standard and finished in blue and black paint work with polished brass and steel work NYC & HRRR to tender.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

2 inch scale model of an Articulated Clayton Undertype wagon, built by Mr. M. Olver, with brazed superheated copper boiler with centre fueling shute and fittings including water and pressure gauges, safety, blower, injector, whistle, clack and blowdown valves. Engine details include twin cylinders with enclosed valve gear and cranks, ratchet operated lubricator, eccentric driven feed pump and by pass and single speed chain drive to rear axle. Chassis details include worm and quadrant operated Ackerman steering, rubber tyred wheels with brass hub caps, working leaf springs, rear axle differential unit, water tank with hand feed pump, whistle, canvas covered planked cab roof with removable rear panel and other details. Trailer details include riveted channel section frame, working leaf springs, rubber tyred wheels with brass hub caps and wooden platform sides and bottom, finished in green and red, Southern Federation of model Engineers Test Certificate valid to 31-1-2006, width 14 inches x length 61 inches.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Finely engineered 2 inch scale model of an Agricultural Engine, scratch built and based on a Clayton and Shuttleworth engine built by the late Ted Hopkinson and his son of James Hopkinson and Sons, Agricultural Engineers of Newark. The engine has a brazed copper boiler with thirty-two tubes and fittings including water gauge, pressure gauge, safety valve, blower, water lifter, clack and blowdown valves. Engine details including twin high pressure cylinders 1 1/8 inch bores, drain co*cks and pipes, twin ratchet mechanical lubricators, crosshead guides, Stephenson's link reverse, eccentric driven feed pump and bypass, two road speeds, solid flywheel, other details include spoked straked wheels, worm and roller chain steering, cable drum, fairleads, hand brake, wooden foot board with steps, finished in green and red paintwork, 39 inches and 15 1/2 inches (99cm x 39cm), Collection of stainless steel tools, shovel, bottle jacks and strakes. Complete with glazed case on polished mahogany stand.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

Brannam model of a cat, having green ground with winged collar, inscribed C. H. Brannam, Barum, 1903, 20cm high.

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

C. H. Brannam model of a hare, standing with paws on a barrel, green/blue ground, inscribed C.H. Brannam, Barum, 1904, height 10cm. (Slight chip to ear)

No Image

Dreweatt Neate Honiton Salerooms

Lot 1

C. H. Brannam model of a pig with barrel, having blue/green ground, inscribed Brannam, Barum, height 8cm.

No Image

Thomson Roddick & Medcalf Dumfries

Lot 1

A David Frykman painted and moulded model of 'The Fisherman'.

No Image

Thomson Roddick & Medcalf Dumfries

Lot 1

A half-cast fibreglass model of a co*ck salmon, 34in. long.

No Image

Richard Winterton Auctioneers

Lot 1

A BOXED MODEL AIRCRAFT, 'Frog Mark IV Interceptor Fighter', 'J9842' decals, silver livery, with two lubricant bottles, length of model 24cm

No Image

Richard Winterton Auctioneers

Lot 1

OO GAUGE MODEL MAKERS ACCESSORIES, (parcel)

No Image

Richard Winterton Auctioneers

Lot 1

A RADIO CONTROLLED MODEL, 'R.A.F Rescue and Target towing launch, Vesper', 1/2" scale, exhibited at the National Arts & Crafts Exhibition, length 90cm

No Image

Richard Winterton Auctioneers

Lot 1

A BOXED 'CROSSFIRE' GAME, and a parcel of games and toys, including an Airfix model of a SA.330 Puma

No Image

Richard Winterton Auctioneers

Lot 1

ASSORTED HORNBY, Tri-ang and Airfix, model train carriages and related accessories, (parcel)

No Image

Richard Winterton Auctioneers

Lot 1

A LARGE QUANTITY OF MOTORING AND MODEL PUBLICATIONS

No Image

Richard Winterton Auctioneers

Lot 1

AN OO GAUGE MODEL RAILWAY COLLECTION, including two boxed Tri-ang Railways locomotives, and rolling stock, various boxed/unboxed trackside accessories and track

No Image

McTear's

Lot 1

A collection of Glengoyne whisky water jugs of various forms and colours, makers including Seton Pottery, Highland China and a Lledo model vintage Glengoyne delivery vehicle in box, mainly modern (6

No Image

McTear's

Lot 1

Glenmorangie whisky water jug of thistle form with logo in red and black over mustard, an identical miniature example, two Lledo model vintage delivery vehicles in boxes and two Glenmorangie tasting glasses in boxes (6)

No Image

McTear's

Lot 1

A large collection of boxed Corgi and others, model vehicles bearing Guinness advertising logos including articulated trucks, vintage vehicles, buses, tankers, etc., good condition (32)

No Image

Dreweatt Neate Donnington Priory Salerooms

Lot 1

Sir William Russell Flint (1880-1969), Dressing the model, lithograph, signed within the plate lower left, signed in pencil within the margin lower right, s. 37.5 x 27 cm

No Image

Sotheby's Olympia

Lot 1

William Reid Dick, British, 1879-1961, FEMINA VICTRIX, indistinctly signed; plaster, together with a modern bronze cast of the model and original letter from Reid Dick to Ralph Palmer, dated 18th Sept. 1946. h.23cm., w.35cm.

No Image

Sotheby's Olympia

Lot 1

A pair of Staffordshire porcelain models of spaniels, mid 19th century, modelled seated on their haunches, facing left and right, enriched with iron-red detailing; together with a similar smaller pair, raised on oval mound bases; and a model of a recumbent spaniel. former 17.8cm., 7in. high. one leg of first pair re-stuck. (5).

No Image

Sotheby's Olympia

Lot 1

Six assorted Staffordshire porcelain and pottery dog penholders, second half 19th century, including: two modelled with a recumbent spaniel before a dead hare, one on a green base, the other blue; an example with a recumbent spaniel with iron-red details, its front paws crossed, raised on a green oval cushion base with pink trim; a group with a flower basket spaniel and two pups on a blue base; another with a black and white dog and a pup raised on a blue rectangular base; and a miniature example surmounted by two pups playing; together with a porcelain model of a dog with iron-red details raised on a gilt-lined mound base; a model of a mother dog and two pups, raised on a scroll-moulded base; a figure of a girl standing beside a dog and its kennel; and a small shepherdess group. one with applied 'Stephen Long Antiques' applied paper label. longest 14cm., 5.5in. some minor damage, repair and restoration. (10).

No Image

Sotheby's Olympia

Lot 1

A Royal Worcester limited edition figure of Nijinsky, circa 1971, modelled by Doris Lindner, number 300 from an edition of 500, with a framed certificate; together with a Royal Worcester limited edition model of H.R.H. The Duke of Edinburgh, circa 1968, modelled by Doris Lindner, number 154 from an edition of 750. black printed marks. former 23.5cm., 9.25in. long. Duke of Edinburgh's horse with glued tail. (6).

No Image

Batemans Auctioneers

Lot 1

JVC videosphere television, 'Spaceman's helmet' design white plastic on square base, circa 1970, the screen with smoked perspex visor, model 3240 UK, in working order

No Image

Batemans Auctioneers

Lot 1

Steiff: a model Limited Edition ceramic cat, white, no. 992 of 1000, made in Germany for Margarete Steiff Gmbt, boxed